Item:
Length:
MATERIALS:
- Copper
- Aluminum
- Steel EG
- Powder Coated
Custom brackets are manufactured for: Bartile, Ludowici, & MonierLifetile.
PACKAGING:
100 Brackets per box.
ADDITIONAL INFORMATION:
For optimum assurance that snow and ice not slide, always use the snow load/slope chart to determine the number of snow brackets per square of shingle or slate.
Snow loads vary. Check with the local building department to verify the snow load in your area.
Paintlock brackets are available for you to paint but must be painted or rusting will occur. Orders placed with 100 powder coated brackets or less will have a $100.00 paint charge. Orders placed with 200 powder coated brackets or less will have a $50.00 paint charge.
NOTE: SNOW BRACKET A IS INSTALLED ON THE TOP SURFACE OF THE TILE WITH THE TRIANGULAR END OF THE BRACKET OVER THE HEAD LAP OF THE TILE AND THE SPIKE INSTALLED INTO 1 X 2 BATTEN.
Tile Roof Accessories (TRA-Mage) Snow Brackets A and B have been engineered for use with concrete tiles which are installed using horizontal battens. Horizontal batten should be nailed on 12" centers through sheathing with minimum 8d galvanized nails. For double batten systems, horizontal batten should be a minimum 1 x 4 nailed with a minimum of two 10d galvanized nails over every vertical batten. Vertical batten spacing horizontally is not to exceed 16". For live loads over 110 lbs per square foot please refer to page 3-4 of the T.R.I. Cold Roof Manual. Custom snow bracket lengths are available. For optimum assurance that snow and ice will not slide, always use the snow load/slope chart to determine number of snow brackets per roof square of tile. Snow loads vary by area. Check with the local building department to verify snow load for your area. TRA-Mage Snow Brackets can be installed on existing or new construction.
INSTALLATION CHART
INSTALLATION GUIDE
